To Next PageTo Next Page
Need help?Do you have a question about the LORCH T 180 DC BasicPlus and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Welding Current Range | 10 - 180 A |
| Duty Cycle | 40% at 180 A |
| Duty Cycle at 180 A | 40% |
| Protection Class | IP23 |
| Insulation Class | F |
| Welding process | TIG, MMA |
| Power Supply | Single-phase AC |
Essential safety measures, PPE, hazard awareness, and environmental considerations.
Explanation of switches for selecting welding processes and operating modes.
How to select and adjust welding parameters using switches and knobs.
Steps to start and set initial parameters for electrode welding.
Steps to start and set initial parameters for TIG welding.
Detailed guide to adjusting secondary parameters like hotstart and arc dynamic.
Configuring programmable parameter spaces for Powermaster torches.
Procedure for setting the torch identification (Torch-ID).
Overview of TIG welding, shielding gas, and electrode types.
Detailed list of error codes, their meanings, and troubleshooting steps.
Guidelines for regular maintenance, repair, and spare parts.
