LORCH T 180 DC BasicPlus - English

- 27 -
01.21 909.2669.9-02
Table of contents
1 Machine elements .................... 28
2 Explanation of symbols ............... 28
2.1 Meaning of the symbols in the operation manual . 28
2.2 Meaning of the symbols on the machine .......... 28
3 Safety precautions .................... 29
4 Ambient conditions ................... 30
5 General regulation of use .............30
6 UVV inspection ....................... 30
7 Unit protection ....................... 30
8 Electromagnetic compatibility (EMC) . 30
9 Mains connection ..................... 31
10 Noise emission ........................ 31
11 Transport ............................. 31
12 Before commissioning ................ 32
12.1 Fasten transportation belt ........................ 32
12.2 Fastening accessories belt ........................ 32
12.3 Electrode welding process ........................ 33
12.4 TIG welding process .............................. 33
13 Control panel ......................... 36
14 Starting up ........................... 38
14.1 Electrode welding process ........................ 38
14.2 TIG welding process .............................. 38
14.3 Secondary parameters ........................... 39
14.4 Powermaster parameters ......................... 40
14.5 User-specic menu ............................... 40
14.6 Special functions ................................. 41
14.7 Torch ............................................ 42
15 Welding basics ........................ 42
15.1 Stick electrode welding ........................... 42
15.2 TIG welding ...................................... 43
16 Technical data ........................ 44
17 Messages ............................. 47
17.1 Informative messages ............................ 47
17.2 Error messages ................................... 48
18 Maintenance and repair .............. 49
19 Disposal .............................. 49
20 Service ................................ 49
21 Certicate of conformity .............. 49