To Next PageTo Next Page
Need help?Do you have a question about the LORCH T 220 AC BasicPlus and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Welding current range | 5 - 220 A |
| Duty cycle | 40% at 220 A |
| Protection class | IP23 |
| Insulation class | F |
| Rated welding current | 220 A |
| Power supply | 1-phase |
| Weight | 13.5 kg |
| Welding process | MMA |
Comprehensive safety instructions covering personal safety, environmental hazards, and proper machine handling.
Step-by-step guide for setting up the electrode welding process, including cable connections.
Instructions for setting up the TIG welding process, including torch and gas connections.
Steps to start up for electrode welding, including parameter settings.
Guide to starting up for TIG welding, including mode and parameter selection.
Detailed list of error codes, their meanings, and recommended troubleshooting steps.
Instructions for regular checks, maintenance, and safe repair procedures.
