Why does my LORCH Welding System show E01 (thermal overload)?
Your LORCH Welding System displays the error code E01 (thermal overload) because the temperature has reached the programmed maximum value, causing the machine to stop.
General| Brand | LORCH |
|---|---|
| Model | P-Basic |
| Category | Welding System |
| Language | English |
Main control board managing welding sequence and process control.
Front panel board containing buttons, rotary impulse encoder, and displays.
Primary driver board for the power units.
Measures the welding current for process control and monitoring.
Monitors heatsink temperature to prevent thermal overload.
Monitors internal power supply voltages essential for correct machine operation.
Monitors the welding current for accuracy and safety during operation.
Monitors protective earth connection and optional gas pressure status.
Lists error codes, their reasons, and recommended removal steps.
To Next Page
