LORCH HandyTIG 180 DC Basic Plus User Manual

- 25 - 10.15
1 Machine elements .............26
2 Explanation of symbols ........26
2.1 Meaning of the symbols in the operation
manual ...............................26
2.2 Meaning of the symbols on the machine .....26
3 Safety precautions ............27
4 Ambient conditions ............ 28
5 General regulation of use .......28
6 Unit protection ................ 28
7 UVV(regulation for prevention of
accidents) inspection ..........28
8 Emission of sound ............28
9 Electromagnetic compatibility
(EMC) .......................29
10 Mains connection .............29
11 Transportation and set up ......29
12 Short instructions .............29
13 Before operation ..............30
13.1 Fasten transportation belt .................30
13.2 Connecting the ground cable ..............30
13.3 Connect to mains .......................30
13.4 Electrode welding process ................31
13.5 TIG welding process .....................31
14 Starting up HandyTIG 180 DC
ControlPro ...................33
14.1 Electrode welding process ................34
14.2 TIG welding process .....................34
14.3 Jobs .................................34
14.4 Access secondary parameter en ...........35
14.5 Special functions .......................35
15 Starting up HandyTIG 180 DC
BasicPlus ....................36
15.1 Electrode welding process ................37
15.2 TIG welding process .....................37
16 Up/Down-torch ................38
16.1 Torch functions .........................38
17 Messages ....................39
17.1 Information and error messages HandyTIG
180 DC ControlPro ......................39
17.2 Error messages HandyTIG 180 DC BasicPlus . 39
Table of contents
18 Troubleshooting ..............40
19 Graphs ......................41
20 Basics of welding .............42
20.1 Stick electrode welding ...................42
20.2 TIG welding ...........................42
21 Technical data ................43
22 Care and maintenance .........44
22.1 Check regularly .........................44
23 Disposal .....................44
24 Service ......................44
25 Certicateofconformity ........44
26 Printed forms for programming
secondary parameters Handy 180
DC BasicPlus .................45
27 Ersatzteilliste / spare parts list /
Списокдеталей .............222
27.1 HandyTIG 180 DC Basic Plus ............222
27.2 HandyTIG 180 DC Basic Plus NP .........224
27.3 HandyTIG 180 DC Basic Plus RU .........226
27.4 HandyTIG 180 DC Control Pro ............228
27.5 HandyTIG 180 DC Control Pro NP .........230
27.6 HandyTIG 180 DC Control Pro RU .........232
28 Stromlaufplan / schematic /
Схематический ..............234
28.1 HandyTIG 180 DC Basic Plus ............234
28.2 HandyTIG 180 DC Control Pro ...........236

LORCH HandyTIG 180 DC Basic Plus Specifications

General

Brand	LORCH
Model	HandyTIG 180 DC Basic Plus
Category	Welding System
Language	English