Lorex LH030 ECO BLACKBOX3 SERIES - Page 18

Rear Panel (LH030 Series)
5
16–Channel
0
0
0
0
0
00
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
00
0
0
1
0
2
0
3
0
0
5
0
7
0
8
0
10
0
6
0
4
0
0
0
0
9
0
0
0
0
12
0
11
1. Video Input: Connect BNC cameras.
2. Video Output: Outputs the DVR interface to a BNC connection. This allows you to see
your mouse cursor and have full control of the system on a secondary monitor. To
switch the mouse and system interface between BNC and VGA/HDMI monitors, press
0 three times on the remote control.
Note
Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV
connection).
3. Audio Output: Output for 1 RCA audio channel (e.g. speakers).
4. Audio Input: Input for 4 RCA audio-enabled cameras (not included).
5. HDMI: Connect to an HDMI monitor or TV (not included) to view the system interface.
6. VGA: Connect a VGA monitor (not included) to view the system interface.
7. LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
8. USB Port: Connect a USB mouse (included) or USB flash drive (not included) for data
backup or firmware updates.
9. RS485/Alarm Block: Connect compatible PTZ cameras (not included) or alarm sen-
sor devices (not included).
10. DC12V: Connect the included AC power adapter.
11. On / Off Switch: Turns the DVR on or off.
12. IR EXT: Service only; not supported.
#LX400008; r. 2.0/12067/12067; en-US
8