Lorex LH030 ECO BLACKBOX3 SERIES - 5 Rear Panel (LH030 Series)

Rear Panel (LH030 Series)
5
4–Channel
00
0
0
0
0
0
00
0
0
0
0
00
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
00
0
0
1
0
2
0
3
0
0
0
4
0
5
0
6
0
8
0
9
0
10
0
7
8–Channel
0
0
0
0
0
00
0
0
0
0
00
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
00
0
0
1
0
2
0
3
0
0
0
4
0
5
0
6
0
8
0
9
0
10
0
7
1. Video Input: Connect BNC cameras.
2. Video Output: Outputs the DVR interface to a BNC connection. This allows you to see
your mouse cursor and have full control of the system on a secondary monitor. To
switch the mouse and system interface between BNC and VGA/HDMI monitors, press
0 three times on the remote control.
Note
Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV
connection).
3. Audio Output: Output for 1 RCA audio channel (e.g. speakers).
4. Audio Input: Input for 2 RCA audio-enabled cameras (not included).
5. HDMI: Connect to an HDMI monitor or TV (not included) to view the system interface.
6. VGA: Connect a VGA monitor (not included) to view the system interface.
7. LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
8. USB Port: Connect a USB mouse (included) or USB flash drive (not included) for data
backup or firmware updates.
9. RS485: Connect compatible PTZ cameras (not included).
10. DC12V: Connect the included AC power adapter.
#LX400008; r. 2.0/12067/12067; en-US
7