Lorex LH030 ECO BLACKBOX3 SERIES - Replacing the Hard Drive (LH030 Series); Removing and Installing the Hard Drive; Formatting the Hard Drive

Basic Setup (LH030 Series)
6
Camera Installation Diagram
00000
0
0
0
0
0
0
0
0
0
00
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
B
NC
1
2
3
4
6
5
1. Camera.
2. End of extension cable with male power connector.
3. Extension cable.
4. End of extension cable with female power connector.
5. Camera power adapter.
6. DVR.
6.11.3 Connecting and Removing BNC Cables
BNC (Bayonet Nut Connector) is a special connector that locks on to the system port and
cannot be accidently removed.
To connect or remove a BNC connector:
• Push the BNC connector firmly into the BNC port and simultaneously twist the connec-
tor clockwise to tighten.
• To remove a BNC connector from a BNC port, push and simultaneously twist the con-
nector counter-clockwise to loosen the BNC connector.
#LX400008; r. 2.0/12067/12067; en-US
14