Lorex LH030 ECO BLACKBOX3 SERIES - Lorex Player for Mac: Viewing Backed up Video on Mac; Installing and Using Lorex Player for Mac

Basic Setup (LH030 Series)
6
00
0
0
1
0
2
1. HDMI port.
2. VGA port.
6.5 Step 5: Connect the Power Adapter and Power on the DVR
• 4/8–channel models: Connect the included power adapter to the DC 12V port. Con-
nect the end of the power adapter to a wall socket or a surge protector.
00
0
0
• 16-channel models: Turn the power switch to I to turn on the DVR.
0
0
At startup, the system performs a basic system check and runs an initial loading sequence.
After a few moments, the system loads a live display view.
6.6 Step 6: Upgrade Firmware to Latest Version (if Available)
If a firmware upgrade is available, you will be asked to install it once the DVR starts up. It is
required to upgrade your system firmware and client software or mobile apps to the latest
version to enable remote connection to the system.
#LX400008; r. 2.0/12067/12067; en-US
10