111
Client Software for PC or Mac
General
The General sub-menu allows you to configure general system settings.
To configure general settings:
1 Configure the following:
• Device Name: Ent
er a name for your NVR.
• Device No.: Ent
er the ID for the remote control. For details, see “Pairing the Remote Control”
on page 68.
• Record Replace: Sel
ect Yes to enable overwrite, or select No to disable overwrite.
• Syncronous IPC:
Make sure this is checked.
2 Click Sav
e to save changes.
Camera
NOTE: Do not change any settings in this sub-menu. To configure camera settings, see
“Camera Settings” on page 117.
To Next Page
Loading...
