Lorex LNR300 - Configuring Camera Recording Schedules

119
Client Software for PC or Mac
To configure video quality:
1 Under Camer
a, select the camera you would like to configure.
2 Cl
ick Video Quality.
3 Con
figure the settings for the Main Stream, Sub Stream, and Event Stream:
• Vi
deo Quality: Select Low, Medium, or High quality settings for each stream.
• M
ain Stream/Sub Stream/Event Parameters: Select the desired resolution for each stream.
• Adv
anced Settings: Allows you to adjust the frame rate, bitrate, and other advanced settings
for each stream.
4 (Optional) Use
the Copy to button to copy settings to other cameras.
5 Cl
ick Save to save changes.
Configuring Camera Recording Schedules
Use the recording schedule to configure when cameras will record continuously or using
motion detection only.
To configure camera recording schedules:
1 Under Camer
a, select the camera you would like to configure.
2 Cl
ick Schedule.
3 Check Local Re
cording to enable recording for the selected camera or un-check to disable.
4 By
default, the recording schedule is set for Continuous & Motion Recording 24/7. To
customize the recording schedule, click All Day Template. Select one of the following
options.
• All-day T
emplate: Enable Continuous & Motion Recording 24/7.
• We
ekday Template: Enable Continuous & Motion Recording during working hours (9-5
Mon-Fri) only. Do not record outside these hours.
• Alarm T
emplate: Enable Motion Recording only 24/7.
• Select one of the standard templates or select T
emplate01~08 and click Edit to create a
custom template. Click the recording options at the top of the screen and click and drag