Receiver Overview
6
6.3 Rear Panel
1. Wireless Antenna: Position the antenna as needed for best reception.
2. Speaker
3. Stratus UID Number / QR Code: Unique ID number for connection to the system with
a smartphone / tablet.
4. SD Card Slot: Insert up to a 64GB SD card.
5. USB Port: Used for service purposes only.
6. Receiver Stand
7. Ethernet Port (RJ45): Connect the receiver to your router using the included Ethernet
cable to enable smartphone / tablet connectivity.
8. Power: Slide switch to turn the LCD receiver ON/OFF.
9. Power Port: Connect to a local power outlet using the included power adapter.
10. Power Indicator LED: Glows when receiver is connected to power.
#LX400077; r.35258/35258; en-US
13
To Next Page
Loading...
