150
Troubleshooting the video display
Manually setting the DVR output mode
You can set the DVR to always output to the VGA port by manually configuring the output
settings.
To manually adjust the o
utput settings:
1 Right-click and click Main Me
nu.
2 Click Ad
vanced>A/V Setup.
3 In the Output Device drop-down menu, select VGA.
NOTE: In the 16-channel model, select VGA in th
e Init DEV drop-down menu.
4 Click A
pply to save your settings.
Select VGA
4/8 Channel
Select VGA
16 Channel
To Next Page
Loading...
