Contents
Page 2
1. Overview 3
2. Maintaining Accuracy 5
2.1 Machine Requirements 5
2.2 Lifting Procedure 5
3. Initial Setup 6
3.1 Selecting Channel 6
3.2 Check/Change Display Readout 6
3.3 Weighing Methods 7
3.3.1 Dynamic Weighing 7
3.3.2 Static Weighing 7
3.4 Check/Change Weighing Modes 7
4. Check/Set Zero Weight 8
4.1 Check Zero Weight 8
4.2 Set Zero Weight 9
5. Calibration 10
5.1 Weight Calibration 10
5.2 Display/Change Calibration Factor 10
5.3 Calibration Procedure 11
5.4 Calibration Example 12
6. Reset Channels/Totals 13
6.1 Reset Channels 13
6.2 Reset Totals 13
7. Faults 14
8. Troubleshooting 15
9. Notes 18
To Next Page
Loading...
