Loup Electronics Weighlog 100 - Reset Channels

6 - Reset Channels/Total
Page 13
6.1 Reset Channels
  Channels 1 thru 5 can be reset independently.
  1. Select the correct channel 1 thru 5
  2. Press and hold the remote enter button for 5 seconds. The display will flash
  5 times and then reset to 0.
  This does not affect the TOTAL channel.
6.2 Reset Total
  1. Select the TOTAL channel
  2. Press and hold the remote enter button for 5 seconds. The display will flash
  5 times and then reset to 0.
Select correct
channel 1 thru 5.
Press and hold the
remote enter button.
Select the
Total channel.
Press and hold the
remote enter button.