To Next PageTo Next Page
Need help?Do you have a question about the LOVATO ELECTRIC RGAM40 and is the answer not in the manual?
General| Brand | LOVATO ELECTRIC |
|---|---|
| Model | RGAM40 |
| Category | Controller |
| Language | English |
Provides an introduction to the RGAM4x controller and an overview of its features and basic warnings.
Highlights critical safety warnings and precautions for installing and operating the equipment.
Details the functions of the front panel keypad, LCD display, and different operating modes (MAN, AUT, TEST).
Explains how alarms are indicated, managed, and reset by the controller.
Describes methods for accessing setup menus via keyboard or PC, and navigating through them.
Covers the available commands for system control and an overview of parameter access.
Provides recommendations for data backup and details on the user-configurable information page.
Explains the properties that can be assigned to digital inputs/outputs and alarms.
Details analog sensor inputs, voltage/current inputs, and hidden command functions.
Describes the periodic automatic test feature, its configuration, and operation.
Configuration of utility functions like language and clock, and general settings like wiring and voltage.
Settings related to battery voltage monitoring and limits.
Parameters for engine starting sequences, preheating, and engine control functions like pressure/temperature.
Parameters for monitoring and controlling mains and generator voltage and frequency.
Settings for generator protection (e.g., overload) and test/maintenance parameters.
Parameters for communication interfaces (RS232/RS485) and miscellaneous functions.
Configuration of programmable digital input functions and their properties.
Configuration of programmable output functions and their properties.
Detailed explanations of various programmable output functions available.
Overview of alarm properties and the list of defined alarms with their basic information.
Continued details on alarm properties and specific alarm descriptions.
Describes how events are recorded, managed, and lists detected events.
Provides a summary of key technical specifications for power, inputs, and outputs.
Detailed specifications for analog inputs, relay outputs, and communication interfaces.
Information on operating conditions, connections, and relevant technical standards.
Illustrates the primary wiring schematic for the RGAM4 controller.
Wiring diagrams for single-phase and permanent magnet alternator generating sets.
Wiring diagram specifically for generating sets using a pick-up input.
Details the RS-485 interface wiring and terminal block connections.
Provides the overall physical dimensions and panel cutout information for installation.
