Lovibond CheckitDirect - Error Codes

42
CheckitDirect_Cl-Br-pH-CyA-TA-CaH_2 09/2010
GB
Error codes
Error codes
Light absorption too great. Reasons: e.g. dirty optics.
Calibration factor "out of range"
Too much light reaching the detector.
Battery capacity was too low during measurement. Change battery.
CL: Factory calibration incorrect / erase
CL: User calibration incorrect / erase
pH: Factory calibration incorrect / erase
pH: User calibration incorrect / erase
CyA: Factory calibration incorrect / erase
CyA: User calibration incorrect / erase
tA: Factory calibration incorrect / erase
tA: User calibration incorrect / erase
CaH: Factory calibration incorrect / erase
CaH: User calibration incorrect / erase
E 01
E 10 / E 11
E 70
E 76
E 71
E 77
E 72
E 78
E 73
E 79
E 74
E 75
E 20 /E 21
E 22