16 |
Transducer installation| Installation Manual
Motor mounting
The transducer can be oriented in three dierent ways on most
motors; down looking, forward looking, or in scout position.
Down Forward Scout
The transducer can be mounted on the port or starboard side of
the shaft.
Port side Starboard side
Down:
Use for vertical shing to see what is below the transducer. Watch
your lure and sh movements in real time.
Forward:
Use for seeing sh and structure directly in front of the transducer.
Know the depth of the sh and structure to target your next cast.
Scout:
Use to scan large areas for sh and structure. Search for schooling
sh and know the direction of your next cast.
To Next Page
Loading...
