Need help?Do you have a question about the Lowrance ActiveTarget 2 and is the answer not in the manual?
General| Transducer Type | Active Imaging |
|---|---|
| Target Separation | 1 inch |
| Cable Length | 20 feet |
| Sonar Type | Live Sonar |
| Connectivity | Ethernet |
| Frequency | 800 kHz |
| Compatibility | HDS LIVE, HDS Carbon, Elite FS |
| Display Modes | Down |
| Power Consumption | 1.5A |
| Power Output | 500W |
| Operating Temperature | -15°C to +55°C (5°F to 131°F) |
Overview of the ActiveTarget 2 live sonar system and its capabilities.
Lists and illustrates all the parts included with the ActiveTarget 2 system.
Guidance on selecting an optimal and safe location for mounting the sonar module.
Step-by-step instructions for physically attaching the sonar module.
Details on mounting the transducer onto a trolling motor shaft for different views.
Instructions for orienting the transducer for Down, Forward, or Scout viewing modes.
Procedures for mounting the transducer directly onto the trolling motor.
Specific steps for motor-mounted transducer setup for down or forward views.
Instructions for mounting and configuring transducer for scout view on the motor.
Information on mounting the transducer on a boat's transom.
How to configure two transducers for simultaneous forward and scout views.
Instructions for setting up transducers for a 180-degree viewing perspective.
Details on installing transducers for the wide scout viewing mode.
Steps for connecting the transducer cable to the sonar module.
Instructions for connecting the Ethernet cable to the sonar module and MFD.
Guide for connecting the power cable to the sonar module.
Explains controlling sonar module power via external switch or MFD.
Instructions for grounding the sonar module to prevent noise and corrosion.
Explains the meaning of the LED lights on the sonar module.
Detailed measurements for the sonar module.
Detailed measurements for the transducer.
Comprehensive technical data for both sonar module and transducer.
To Next Page
