Need help?Do you have a question about the Lowrance Elite-5 HDI Combo and is the answer not in the manual?
General| Display Size | 5 inches |
|---|---|
| Display Resolution | 480 x 480 pixels |
| Display Type | Color TFT |
| Backlight | LED |
| GPS | Yes |
| Chartplotter | Yes |
| Waterproof Standard | IPX7 |
| Voltage | 12V DC |
| Sonar Frequency | 83/200 kHz (Broadband), 455/800 kHz (DownScan Imaging) |
| Mapping | Base maps |
| Waypoints, Routes, Tracks | 3000 waypoints, 100 routes, 100 saved trails |
| Media Port | MicroSD card slot |
| Sonar Type | Hybrid Dual Imaging (HDI) |
Enables enhanced features like arrival radius, alarms, and NMEA options.
Details the display of DownScan sonar data and its overlay.
Step-by-step guide to adding custom data fields to the display.
How to place a waypoint at current position or cursor, with name and icon.
Controls depth range, transducer frequency, and ping speed for optimal sonar performance.
How to place a waypoint at current position or cursor, with name and icon.
Adjusts detail level and separates strong/weak echoes for better identification.
Controls sonar wave transmission rate and transducer frequency.
Adjusts depth readings and calibrates speed/temperature sensors.
How to create a waypoint on the chart display.
Manages waypoints, routes, and trails for navigation.
Allows editing, displaying, and navigating to selected waypoints.
Guides on creating routes from waypoints or chart points.
Instructions for navigating routes in forward or reverse direction.
Used to edit/create routes, names, and control route display.
Steps to create a new trail with custom name and color.
Edit/create trails, select names, color, and display.
Controls map data and display settings like grids and waypoints.
Controls Arrival Radius, Off Course distance, and WAAS/MSAS/EGNOS.
Sets the threshold for the arrival alarm at a destination waypoint.
Sets the threshold for the off-course alarm.
Accesses installation and configuration settings for the unit.
Adjusts unit settings like language, audio, and advanced mode.
Configures GPS satellite monitoring and tracks trip data.
Enables features and settings only available in Advanced Mode.
Resets settings and allows viewing saved files on microSD card.
Enables and configures alarms like Arrival, Off Course, and Anchor.
Describes alarms and selects NMEA sentences for data output.
Details case size, display, waterproof standard, max depth, and frequency.
Covers GPS antenna, mapping compatibility, and card slot.
To Next Page