Need help?Do you have a question about the Lowrance LCX-104C and is the answer not in the manual?
General| Display Size | 10.4 inches |
|---|---|
| Display Type | Color TFT |
| Resolution | 640 x 480 pixels |
| GPS Receiver | Yes |
| GPS Receiver Channels | 12 |
| Waterproof Rating | IPX7 |
| RMS Output Power | 500 watts |
| Peak to Peak Output Power | 4000 watts |
| Sonar Capability | Yes |
| Voltage Range | 10-17 VDC |
| Sonar Frequency | 200 kHz / 50 kHz |
| Mapping Capability | Yes |
| Operating Frequency | 200 kHz / 50 kHz |
| Power Output | 500W RMS |
Detailed technical specifications and features of the LCX-104C unit.
Instructions for mounting transducers on transoms, trolling motors, or inside hulls.
Details on installing the external GPS antenna and receiver module.
Guidance on connecting the unit to a 12-volt power source.
Procedures for mounting the main unit using a gimbal bracket or in-dash.
Basic usage of the sonar features and interpreting the display.
How to adjust sonar sensitivity for optimal echo display.
Steps to diagnose and resolve issues with the unit not powering up.
Troubleshooting steps for unit malfunctions and erratic behavior.
Diagnosing and eliminating electrical noise affecting sonar display.
How to search for specific locations like addresses, POIs, and highways.
Configuring arrival, off-course, and anchor alarms for safety and alerts.
Restoring all unit features and settings to factory defaults.
Searching for landmarks, businesses, and other points of interest.
To Next Page