EasyManuals Logo

Lowrance LGC-4000 User Manual

Lowrance LGC-4000
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Pub. 988-0154-65C
LGC-4000 & LGC-Baja
GPS Modules
Installation Instructions
This document covers the installation of the LGC-4000 or LGC-Baja GPS
modules and how to connect them to a NMEA 2000 network.
All Lowrance NMEA 2000 capable devices are either NMEA 2000 certied
or certication is pending. See our web site for the latest product status
information.
LGC- 4000 Module, bottom view (left) and top view (right).
The LGC module consists of a male threaded cable connector and the GPS
module. The GPS module contains a 16-parallel channel GPS+WAAS receiver.
The cable length from the connector to the GPS module is 18 inches (45.7 cm.
The module packs with a 15’ extention cable, a T connector and parts needed to
mount the module on a at surface or on a pole.
CAUTION: You should read all of the installation
instructions before proceeding. Decide where to install all
components before drilling holes in your vessel or vehicle.
!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lowrance LGC-4000 and is the answer not in the manual?

Lowrance LGC-4000 Specifications

General IconGeneral
TypeGPS Receiver
Update Rate10 Hz
Channels12
WAASYes
Power Supply12 VDC
WaterproofYes
Weight0.5 lb
CompatibilityLowrance
Connection TypeNMEA 0183

Related product manuals