Need help?Do you have a question about the Lowrance LCX-16CI and is the answer not in the manual?
Lists available accessories and transducers for the LCX-16CI unit.
Details on bracket mounting, power, NMEA/DGPS, accessory, and sensor connections.
Explains accessing sonar screens, modes, and customizing data displays.
Adjusting sonar sensitivity, automatic sensitivity, and colorline for echo distinction.
Configuring automatic depth range, manual range, and upper/lower limits.
Features like Zoom, Stop Chart, Chart Speed, and Depth Cursor.
Configures transducer frequency, surface clarity, and noise rejection.
Enables fish symbols, fish depths, and logging sonar chart data.
Setting depth, zone, and fish alarms for sonar events.
Configures transducer type, keel offset, and calibrates speed sensor.
Utilizing the built-in simulator for practice and feature testing.
Setting units, time, ports, DGPS, NMEA, reset options, and software info.
Overview of GPS, finding position via auto search, manual initialization, and DGPS.
Navigating through GPS pages like Status, Navigation, and Map displays.
Using cursor, map orientation, auto zoom, range rings, map data, icons, and plot trails.
Creating, editing, navigating, and managing plot trails.
Methods for saving current position, cursor position, new points, and editing them.
Viewing waypoint details and navigating to saved locations.
Stopping active navigation to a waypoint, route, or Man Overboard position.
Steps to create a route by linking waypoints and following it.
Setting coordinate systems and map fix reference points.
Configuring map datum and enabling/disabling position pinning.
Diagnosing and minimizing sonar problems caused by electrical noise.
Lists available accessories and transducers for the LCX-16CI unit.
Details on bracket mounting, power, NMEA/DGPS, accessory, and sensor connections.
Explains accessing sonar screens, modes, and customizing data displays.
Adjusting sonar sensitivity, automatic sensitivity, and colorline for echo distinction.
Configuring automatic depth range, manual range, and upper/lower limits.
Features like Zoom, Stop Chart, Chart Speed, and Depth Cursor.
Configures transducer frequency, surface clarity, and noise rejection.
Enables fish symbols, fish depths, and logging sonar chart data.
Setting depth, zone, and fish alarms for sonar events.
Configures transducer type, keel offset, and calibrates speed sensor.
Utilizing the built-in simulator for practice and feature testing.
Setting units, time, ports, DGPS, NMEA, reset options, and software info.
Overview of GPS, finding position via auto search, manual initialization, and DGPS.
Navigating through GPS pages like Status, Navigation, and Map displays.
Using cursor, map orientation, auto zoom, range rings, map data, icons, and plot trails.
Creating, editing, navigating, and managing plot trails.
Methods for saving current position, cursor position, new points, and editing them.
Viewing waypoint details and navigating to saved locations.
Stopping active navigation to a waypoint, route, or Man Overboard position.
Steps to create a route by linking waypoints and following it.
Setting coordinate systems and map fix reference points.
Configuring map datum and enabling/disabling position pinning.
Diagnosing and minimizing sonar problems caused by electrical noise.
To Next Page
General