Need help?Do you have a question about the Lowrance LMS-522c iGPS and is the answer not in the manual?
Provides detailed instructions for installing the sonar transducer on different hull types.
Explains how to connect the unit's power and data cables, including diagrams.
Covers basic GPS navigation, including compass rose and course information.
Explains how to view and interact with the unit's map display and track history.
Instructions for creating, saving, navigating, and editing routes between waypoints.
Details how to create, select, edit, and delete waypoints for navigation.
How to configure GPS and sonar alarms for arrival, off-course, anchor, etc.
Options for tracking fuel consumption, tank levels, and adding fuel.
Detailed procedures for calibrating fuel flow and fluid level sensors.
Provides detailed instructions for installing the sonar transducer on different hull types.
Explains how to connect the unit's power and data cables, including diagrams.
Covers basic GPS navigation, including compass rose and course information.
Explains how to view and interact with the unit's map display and track history.
Instructions for creating, saving, navigating, and editing routes between waypoints.
Details how to create, select, edit, and delete waypoints for navigation.
How to configure GPS and sonar alarms for arrival, off-course, anchor, etc.
Options for tracking fuel consumption, tank levels, and adding fuel.
Detailed procedures for calibrating fuel flow and fluid level sensors.
General| Display Size | 5 inches |
|---|---|
| Display Type | Color TFT |
| Resolution | 480 x 480 pixels |
| Chartplotting | Yes |
| Sonar | Yes |
| Waterproof Rating | IPX7 |
| Weight | 2.5 lbs |
| Transducer | Included |
| RMS Power | 500 W |
| Peak Power | 4000 W |
| Frequency | 200 kHz |
| Memory | SD card slot |
To Next Page