Lowrance LGC-4000 User Manual

1
Pub. 988-0154-65C
LGC-4000 & LGC-Baja
GPS Modules
Installation Instructions
This document covers the installation of the LGC-4000 or LGC-Baja GPS
modules and how to connect them to a NMEA 2000 network.
All Lowrance NMEA 2000 capable devices are either NMEA 2000 certied
or certication is pending. See our web site for the latest product status
information.
LGC- 4000 Module, bottom view (left) and top view (right).
The LGC module consists of a male threaded cable connector and the GPS
module. The GPS module contains a 16-parallel channel GPS+WAAS receiver.
The cable length from the connector to the GPS module is 18 inches (45.7 cm.
The module packs with a 15’ extention cable, a T connector and parts needed to
mount the module on a at surface or on a pole.
CAUTION: You should read all of the installation
instructions before proceeding. Decide where to install all
components before drilling holes in your vessel or vehicle.
!

Lowrance LGC-4000 Specifications

General

Type	GPS Receiver
Update Rate	10 Hz
Channels	12
WAAS	Yes
Power Supply	12 VDC
Waterproof	Yes
Weight	0.5 lb
Compatibility	Lowrance
Connection Type	NMEA 0183

Summary

Tools and Supplies for Installation

Mounting the LGC Module

Guidance on physically attaching the GPS module to a vessel or vehicle, including surface and pole mounting.

Surface Mount Procedure

Detailed steps for mounting the GPS module on a flat surface, including drilling and cable routing.

Pole Mount Installation

Powering Your GPS Module

Information on how the GPS module receives power via the NMEA 2000 network connection.

Expanding a NMEA 2000 Network

Guidance on adding more devices to the NMEA 2000 network using an expansion kit.

Limited One-Year Warranty

Service and Accessory Information

How to Obtain Service

Contact information for obtaining technical support and service in the U.S., Canada, and internationally.

Accessory Ordering

Details on how to order additional accessories for Lowrance and Eagle GPS products.