1 Purpose of this TechNote
This document describes how to replace the dispenser unit of the ProtoMat S64/S014.
This TechNote contains specific warning messages for particular instruction steps. A
detailed documentation for the appropriate system as well as further documentations
for the software used can be found in the system documents. Please note that this
TechNote does not substitute the detailed documentation for your system.
Before you start working with the
system, read the detailed documentation
first.
To guarantee a safe and trouble-free
system operation observe and follow the
information, instructions and safety
notes in the detailed documentation.
1.1 Target group
This TechNote is solely intended for the target group Staff and customers of the LPKF
Laser & Electronics AG.
1.2 Scope
The following table lists the scopes of this TechNote.
Table 1: Scope
1.3 Relevant documentations
The following table lists the relevant documentations that are significant for the
contents of the TechNote.
To Next Page
Loading...
