LPKF ProtoMat S43 - User Manual

Questions and Answers

F
freylauraAug 3, 2025
Why LPKF Plotter has no connection?
- B
  brownsheenaAug 3, 2025
  The LPKF Plotter might not be connecting due to several reasons: * There may be no power supply. Ensure the mains cable is correctly connected and plugged into the socket. * The main switch of the circuit board plotter might be in the OFF position. Set the switch to ON. * There could be a data transmission problem. Inspect the USB cable between the plotter and PC, ensuring it is properly connected or replace it. * The USB settings of the operating system might need to be checked.
M
Matthew Fischer DDSAug 12, 2025
What to do if LPKF Plotter has no dust extraction?
- F
  frankramirezAug 12, 2025
  If the LPKF Plotter's dust extraction isn't working, consider the following: * Verify the power supply by checking the mains cable and plugging it into the socket if needed. * Ensure the main switch of the dust extraction is set to either ON or AUTOMATIK. * Check if a fuse has triggered, and if so, press the Reset Button on the dust extraction. * Examine the USB cable between the circuit board plotter and dust extraction, ensuring it's properly connected or replace it.
M
Matthew HaynesAug 23, 2025
How to fix an uptight tool in LPKF Plotter?
- J
  Jesus GonzalezAug 23, 2025
  If a tool is uptight in your LPKF Plotter, it might be due to: * An incorrect tool holder position. You should import the tool holder position again. * Improper tool insertion. Make sure to insert the tool with its top down into the tool holder until it stops. * A soiled tool holder. Clean the tool holder. * A soiled collet chuck. Clean the collet chuck.

Summary

General Information

Introduction and Notation

Overview of document content, conventions, and notations used.

Product Description

Key Features and Scope

Details product characteristics, type label, and scope of delivery.

Safety Notes

Device and General Safety Precautions

Covers electrical safety, health hazards, and general operational safety.

Functional Description

Functionality, Materials, and Technical Specs

Explains function, permitted materials, and technical data of the plotter.

Installation and Commissioning

Assembly, Unpacking, and Setup Steps

Guides through assembly conditions, unpacking, installation, and commissioning.

Operation Guide

Production Process and System Startup

Details the production process, system startup, and CircuitPro interface.

Machining Procedures (Manual & Auto)

Covers manual drilling, manual milling, and automatic operation modes.

System Management

Shutdown and Troubleshooting

Procedures for system shutdown and resolving common operational issues.

Maintenance and Storage

Maintenance and Storage Guidelines

Regular maintenance, scheduled servicing, and storage procedures.

Appendix

Tools, Consumables, and Glossary

Lists tools, consumables, and provides a glossary of terms.

LPKF ProtoMat S43 Specifications

General

Spindle Speed	up to 60, 000 rpm
Tool Change	Automatic
Software	LPKF CircuitPro
Connectivity	USB
Interface	USB
Type	PCB Plotter
Resolution	1 µm
Travel Speed	100 mm/s
Tool Types	Milling tools
Control Software	CircuitPro
Power Requirements	100-240 VAC, 50/60 Hz
Mechanical Resolution	0.001 mm