ProtoMat S Functional description
© 2011 LPKF AG HB V0.9/Mrz-11 33
3
The circuit board plotter may not be used for processing of highly combustible
materials, closed containers, hollow articles, textiles and foods. Any processing
of bodily parts (e.g. fingernails) is not allowed.
Note
Always contact the LPKF service first if you are not sure if the
used materials can be processed with the circuit board plotter.
3.3.1 Disclaimer
The circuit board plotter was developed and produced according to state of the
art technology and approved safety-related regulations. However improper use
or application may cause hazards for body and life of the operator or third
persons or impairments of the device or other material assets.
The manufacturer is not liable for damages that occur by improper use or the
following type of handlings:
● Improper handling, inclusive any applications not mentioned in this
manual
● Applications in improper environments
● Installation and operation with insufficiently trained and informed staff
or unauthorised persons
● Nonobservance of legal safety and work protection regulations
● Nonobservance of technical information
● Incorrect installation
● Insufficient mains power supply
● Unimplemented or insufficient maintenance
● Unauthorised technical modifications
● Employment of components or materials or spare parts that are not
specially licensed for this circuit board plotter
To Next Page
Loading...
