Need help?Do you have a question about the LPKF ProtoMat S64 and is the answer not in the manual?
General| Interface | USB, Ethernet |
|---|---|
| Software | LPKF CircuitPro |
| Spindle Speed | up to 60, 000 rpm |
| Tool types | drills |
| Resolution | 0.001 mm |
| Accuracy | ±0.01 mm |
| Positioning Accuracy | ±0.01 mm |
| Repeatability | ±0.005 mm |
| Tool Holder | ER-11 collet |
| Supported Materials | FR4, aluminum |
| Power Requirements | 230 V, 50/60 Hz |
To Next Page
