LPKF ProtoMat S64 - Modes of Operation

Structure and function
ProtoMat S64/S104
46/160
LPKF Laser & Electronics AG | V. 1.0
PCs with Intel Core i3/i5 or i7 processor of the 6th generation (Skylake) do not fully
support the USB 2.0 interface of the installed camera. If problems arise while
transmitting the camera image, LPKF recommends to use a USB 3.0 camera.
3.9 Modes of operation
The system has two modes of operation:
 Production
 Service
The production mode is used for normal operation and provides depending on the
user group (operator and Advanced user) various setting options (for more
information refer to the CircuitPro PM compendium). The service mode is activated by
entering a password in the software and is reserved for the LPKF Service.