EasyManua.ls Logo

LPKF ProtoMat S64 - Connecting the Extraction System

LPKF ProtoMat S64
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ProtoMat S64/S104
First startup
69/160
NOTICE
Property damage by improper startup of the extraction system!
Improper installation and startup can cause damage to the extraction system.
Observe the minimum clearance around the extraction system defined by the
manufacturer.
Use only sockets with protective earth conductor for connecting.
Do not use extension cables.
Do not bend the extraction hose.
Do not block the air flow.
5.4.1 Connecting the extraction system
The extraction system is an optional accessory that can be ordered at LPKF. The
following describes the required steps for connecting the JetStream iSeries AX079-25:
Material
The following material is required:
Fig. 40: Extraction hose
Fig. 41: Nozzle for extraction hose
Fig. 42: Mains cable
Fig. 43: Control cable

Table of Contents

Other manuals for LPKF ProtoMat S64

Related product manuals