LPKF ProtoMat S64 - Camera; Measurement Unit for Determining the Copper Layer Thickness

Structure and function
ProtoMat S64/S104
34/160
LPKF Laser & Electronics AG | V. 1.0
3.4.4 Camera
The system can recognize the fiducials on the material with the camera and thus
measure the material exactly. Furthermore, the camera can be used to check the
milling width result and thus the milling width adjustment.
Fig. 12: Camera
3.4.5 Measurement unit for determining the copper layer thickness
The measurement unit for determining the thickness of the copper layer is on the
processing head.
Fig. 13: Measurement unit for determining the copper layer thickness
Use this function to measure the thickness of the copper layer automatically. The
measured value is applied for the copper layer thickness in the dialog Material
settings.