Further characteristics of the system are:
Milling spindle with a rotation speed of 60 000 rpm (ProtoMat S64) or 100 000 rpm
(ProtoMat S104).
Integrated camera for recognizing fiducials to enable processing multilayer PCBs.
Processing depth limiter that enables processing substrates with sensitive
surfaces
Copper thickness measurement to determine the copper layer on your base
material (ProtoMat S104 only).
Automatic control of the extraction system for switching on and off.
3.2 Scope of delivery
This chapter provides an overview of the system's scope of delivery. For information
on optional modules, accessories and extras refer to chapter Optional modules,
accessories, extras on page 37.
ProtoMat S64 or ProtoMat S104
Data medium Documentation
Data medium CircuitPro PM
Basic reference ProtoMat S64/S104
Accessories bag containing:
1 × Mains cable US- C13, UL approved 125VAC/10A, length 2 m, color: black,
UL File Number: E88265 E88265
1× Mains cable 230 V Schuko plug IEC 60884
1× Soft brush
2× USB cable for ProtoMat, plug A-B 3 m with snap-on ferrite bead
1× PVC hose connector for extraction system, ProtoMat S64/ S104 and
ProConduct, PVC soft, black
1× Unit for compressed-air connection, pneumatic tube 6 mm with 1/8"
adapter
1× Collet cleaning kit
1 × Filter mat
1 × Collet wrench
1× Working-depth limiter
Lubricant, special plastic lubrication ISOFLEX Topas 5051
Lubricant, Ravenol precision mechanics oil
Screwdriver Torx 6
Screwdriver Torx 10
1× Fuse
1 × Cleaning device for tools
To Next Page
Loading...
