Risk of injuries by pressurized components!
Pressurized components (e.g. compressed-air supply) can move uncontrollably in
case of improper handling or in case of a defect and can cause serious injuries.
Depressurize the components before working on them. De-energize the
residual energies.
Always ensure that there is no unintended escape of compressed air.
Defective components that are under pressure when operating the system have
to be replaced immediately by sufficiently qualified personnel.
If you are using another compressor, ensure that the following characteristics are met:
Ratio of running time to idle time: 60% to 40%
Compressed air min. 6 bar
Standard volume flow
170l/min @ 0 bar
75l/min @ 6 bar
Integrated air drying
To Next Page
Loading...
