4.1 Transport inspection
Check the delivered goods immediately upon receipt for completeness and for
transport damage.
If transport damage is evident, proceed as follows:
Do not accept the delivery or only with reservations.
Record the extent of damage on the transport documentation or on the delivery
note of the transport company.
Initiate a complaint.
4.2 Packaging
The packaging is chosen according to the transport conditions.
The packaging is to protect the system from transport damage, corrosion, and other
kinds of damage until installation.
Keep the packaging in its original form.
Only remove the packaging just before installation.
4.2.1 Handling packaging material
Dispose of the packaging material according to the current laws and local
regulations.
Environmental hazard by wrong disposal of packaging!
Wrong disposal of packaging material can cause environmental hazards.
Dispose of the packaging material environmentally friendly.
Observe the local disposal regulations and hire a specialized company for the
disposal, if necessary.
The system may only be shipped in the original packaging of LPKF. Contact the
LPKF Service if you need the packaging.
To Next Page
Loading...
