To Next Page

To Previous Page

Getting started

CG-6 Operation Manual p/n 115370001 Rev A

2—7

Warm-up period: after you power up the CG-6 Autograv

, it requires a 2 hour warm-

up time in order to reach the operating temperature.

Stabilization period: the instrument requires a 24 hour period after you power up to

stabilize.

Setting up the instrument for field operations: Once the steps have been performed

or attained, your CG-6 Autograv

is ready for field use. For more details on the set up,

please refer to the next chapter entitled: Setting up your CG-6 Autograv

Powering up the CG-6 Autograv

The CG-6 Autograv

can be powered either by:

• The 15V DC external power supply, or

Figure 2-8 Connecting the power supply to the CG-6 Autograv

• by the two internal Smart Batteries supplied with the CG-6 Autograv

Questions and Answers:

Need help?

Do you have a question about the LRS SCINTREX AUTOGRAV CG-6 and is the answer not in the manual?

LRS SCINTREX AUTOGRAV CG-6 Specifications

General