Getting started
CG-6 Operation Manual p/n 115370001 Rev A
Figure 2-1 The CG-6 Autograv
TM
Gravity Meter and its transportation case
Important: During shipment, the batteries must be removed from the
instrument and stored separately. If you have just received
your CG-6 Autograv
TM
, the batteries will have a charge of
approximately 30% and be disconnected from the
instrument.
Unpacking the instrument
1. Press the red pressure release valve located in the front of the transportation case.
2. Pull up the tab of a link lock and turn the tab counter-clockwise to unfasten the lock
from the keeper plate.
3. Repeat step 2 for the other link locks.
To Next Page
Loading...
Need help?
General