Chapter 7. Usage of Various Functions
7-109
10) Synchronization control (POSSYNC)
Function block Description
Input
REQ : Execute POSSYNC function block
CH: Sets the channel (0 ~ 1)
HSC_CH: Sets POSSYNC input channel (0~3)
SCALE: Sets the scale (0 ~ 100%)
Output
DONE: Turns On after the function block is executed without error, and
turns Off if an error occurs or there is no execution command.
STAT: Displays error status
(1) Functions
• When input condition turns on, the designated channel at the rising edge executes the synchronization control by specified scale.
(2) Example program
• When the input condition (%MX000) turns on, Ch. 0 operates synchronization control by 30% of HSC Ch. 0’s speed.
To Next Page
Loading...
