Chapter 8. Communication Functions
8-60
Item Setting value
Header [STX]
Tx/Rx Send
Segment 1 Type: CONST, Field: SND_FRAME, ASCII Input
Segment 2 Type: ARRAY, Field: %MB10, Size: 4 Byte
Tailer [ETX]
* Set BCC following the master station.
(6) Click ‘OK’ after frame setting, and then the frame is registered as below.
(7) Set up a program like the following figure and download it to the slave station GM7U. For details on program setting and
downloading, refer to the GMWIN manual.
To Next Page
Loading...
