Chapter 8. Communication Functions
8-61
• When Frame 0 is received, it saves the value in %MB0 (refer to frame setting of Frame 1) and outputs the value to %QB0.0.0.
The ouputted value of %QB0.0.0 is saved again in %MB10. If the execution is completed without errors, Frame 1 is sent from
function block. Frame 1 sends 4-byte data saved in %MB10.
• If Frame 0 which is receiving frame is not received, this program is not executed.
• ‘Enable Link’ must be set for master and slave.
To Next Page
Loading...
