Chapter 8. Communication Functions
8-90
• Open a new project file from GMWIN
• After selecting Menu-Project-Option, click ‘Connection Option’
• Click ‘Remote 1’ in Depth of Connection
-. Type: select GLOFA Cnet.
-. Base: select ‘0’.
-. Station No.: input slave station number to connect
• The remote connection is completed by clicking ‘OK’, and then the message, ‘Remote 1/GM7U/Local Run’, will be displayed.
• Remote connection is available by dedicated protocol only, and when the master station is connected by local communication.
To Next Page
Loading...
