LS Industrial Systems SV008iC5-2 Series - Page 138

ii
TECHNICAL STANDARDS APPLIED
The standards applied in order to comply with the essential requirements of the Directives 73/23/EEC "Electrical
material intended to be used with certain limits of voltage" and 89/336/EEC "Electromagnetic Compatibility" are the
following ones:
•
EN 50178:1998
“Electronic equipment for use in power installations”.
• EN 5
0081
-
2:1993
“Electromagnetic compatibility-Generic emission standard. Part 2 : Industrial
environment.”
•
EN 55011:1998+A1:1999
“Industrial, scientific and medical(ISM) radio-frequency equipment Radio disturbance
characteristics-Limits and methods of measurement.”
• EN 5
0082
-
2:1995
“Electromagnetic compatibility-Generic immunity standard. Part 2: Industrial
environment.”
EN 61000
-
4
-
2:1995+A1:1998
• EN 61000-4-3:1995
• EN 61000-4-4:1995
• EN 61000-4-5:1995
• EN 61000-4-6:1996
• EN 61000-4-8:1993
• EN 61000-4-11:1994
“Electromagnetic compatibility (EMC). Part 4-2: Testing and measurement techniques.
Electrostatic discharge immunity test.”
“Electromagnetic compatibility (EMC). Part 4-3: Testing and measurement techniques.
Radiated, radio-frequency,electromagnetic field immunity test.”
“Electromagnetic compatibility (EMC). Part 4-4: Testing and measurement techniques.
Electrical fast transients / burst immunity test.”
“Electromagnetic compatibility (EMC). Part 4-5: Testing and measurement techniques.
Surge immunity test.”
“Electromagnetic compatibility (EMC). Part 4-6: Testing and measurement techniques.
Immunity to conducted disturbances, induced by radio-frequency
fields.”
“Electromagnetic compatibility (EMC). Part 4-8: Testing and measurement techniques.
Power frequency magnetic field immunity test.”
“Electromagnetic compatibility (EMC). Part 4-11: Testing and measurement techniques.
Voltage dips, short interruptions and voltage variations
immunity test.”
• EN
V
50140:
199
3
“Electromagnetic compatibility - Basic immunity standard - Radiated radio- frequency
electro magnetic field - Immunity test.”
• EN
V
50141:
199
3
• ENV 50204:1995
“Electromagnetic compatibility. Basic immunity standard. Conducted disturbances
induced by radio-frequency fields.”
“Radio electromagnetic field from digital radio telephones.”