LS tractor LB2100 Series - Backhoe Specifications and Dimensions; Dimensions and Performance Data; Cylinder and Bucket Specifications

BACKHOE SPECIFICATIONS
Backhoe Model : LB2100
Tractor Model :
A. Digging Deth (two foot flat bottom) 2,280 mm 89.7 "
B. Reach from center line of Swing Pivot 3,180 mm 125.1 "
C. Loading Height (bucket at 60°) 1,840 mm 72.4 "
D. Maximum Leveling Angle 10 ° 10 °
E. Swing Arc 180 ° 180 °
F. Transport Height (maximum) 2,120 mm 83.5 "
G. Transport Overhang 1,245 mm 49.0 "
H. Bucket Rotation 180 ° 180 °
I. Stabilizer Spread (down position) 1,745 mm 68.7 "
J. Stabilizer Spread (up position) 1,180 mm 46.4 "
K. Angle of Departure 17 ° 17 °
Shipping Weight - Backhoe(without bucket) 485 ㎏ 1,069 lbs
Bucket Digging Force 1,215 ㎏ 2,679 lbs
Dipperstick Digging Force 955 ㎏ 2,105 lbs
Operating Pressure 170 bar 2,466 psi
Specifications may vary depending on tractor model, tire size and bucket used.
I3030/3030H, I3040/3040H, R4010/R4010H, R4020/R4020H, XR3032/XR3032H, XR3037/XR3037H
XR4040/XR4040H, XR4046/XR4046H, K5047/K5055-2WD, K5055-4WD, XR3135/XR3135H
XR3140/XR3140H, XR4140/XR4140H, XR4145/XR4145H, XR4150/XR4150H, XR4155/XR4155H
Specifications and design are
subject to change without prior
D
I
K
2'
E
A
JB
F
H
G
C
J
H
mm inch mm inch mm inch mm inch
Boom 70 2.756 620 24.409 384 15.118 40 1.575
Bucket 60 2.362 535 21.063 299 11.772 35 1.378
Dipperstick 60 2.362 597 23.504 377 14.843 40 1.575
Swing 60 2.362 398 15.669 223 8.780 35 1.378
Stabilizer 60 2.362 446 17.559 262 10.315 35 1.378
Buckets Bucket
9" Bucket
12" Bucket
16" Bucket
18" Bucket
24" Bucket
36" Bucket
Retracted Length
Cylinders Cylinder
1.76 cu. ft. 64 lbs.
2.02 cu. ft.
46 lbs.
Teeth Q'TY
3
Bore DIA
0.73 cu. ft.
Struck Capacity
5 2.11 cu. ft.
3
3
4
1.01 cu. ft.
1.56 cu. ft.
1.38 cu. ft.
6 2.78 cu. ft. 4.00 cu. ft. 114 lbs.
Rod DIA
Heaped Capacity Shipping Weight
94 lbs.2.82 cu. ft.
Stroke
0.87 cu. ft.
70 lbs.
1.24 cu. ft. 56 lbs.
- 10 -