Why is the battery charging indicator ON during operation of my LS tractor?
If the battery charging indicator is illuminated during operation, check the battery terminals and ground, and repair as needed. You may also need to repair or replace components, replace the alternator, or adjust/replace the belt.
What to do if the start motor turns but the engine does not start on my LS tractor?
If the start motor turns, but the engine doesn't start, you should charge or replace the battery. Also, ensure the ground is tightened. Replacing the oil with the proper viscosity may help. You might also need to bleed the air, clean or replace the filter, repair components, or open the cock.
What to do if my LS tractor has oil leakage?
If you notice an oil leakage, try to tighten the components first. If the leakage persists, you may need to replace some parts.
What to do if the engine oil pressure indicator is ON during operation of my LS tractor?
If the engine oil pressure indicator is ON during operation, supplement the oil. Consider replacing the oil with the proper viscosity, replacing the oil pump, repairing components, or replacing the filter.
How to fix irregular engine revolution in my LS tractor?
To fix irregular engine revolution, try to bleed air from the system. Additionally, clean or replace the fuel filter. If the issue continues, you may need to repair or replace certain components or repair the engine.
What to do if the start motor does not turn when turning the key switch of my LS tractor?
If the start motor does not turn when you turn the key switch, fully depress the clutch pedal. Also, place the PTO switch in the “OFF” position. You may need to charge or replace the battery, tighten the terminal, or repair or replace components.
What to do if the clutch is slipped on my LS tractor?
If the clutch is slipping, adjust the pedal play correctly. If the problem persists, you may need to replace the clutch.
What to do if my LS tractor is still moving despite pedal being in neutral position on HST pedal?
If the tractor is still moving despite the HST pedal being in neutral, adjust the neutral position. Alternatively, replace any damaged parts or fasten the bolt with adhesive.
Why is the HST power too low on my LS tractor?
If the HST power is too low, add oil. You can also check and repair the hydraulic suction line. Try stopping the engine to cool the oil and then restart it. You may also need to repair or replace components or replace the filter.
What to do if the clutch does not cut-off on my LS tractor?
If the clutch does not cut-off, you may need to repair or replace components. You can also try to adjust the pedal play.
Guidance for safe operation before using the tractor.
Important safety instructions for tractor operation.
Description of all operating levers and pedals on the tractor.
Explanation of the tractor's hydraulic system components and functions.
Step-by-step guide for starting and stopping the tractor engine.
Instructions on operating the tractor and bringing it to a safe stop.
Guidance on diagnosing and resolving common tractor issues.
General| Engine Type | Diesel |
|---|---|
| Horsepower | 20 hp |
| Engine Cylinders | 3 |
| Engine Cooling | Liquid |
| Hydraulic System | Open Center |
| 3-Point Hitch | Category I |
| Fuel Tank Capacity | 6.6 gallons |
| Displacement | 1.1 L |
| Tire Size (Front) | 5.00-12 |
| Tire Size (Rear) | 8-16 |
To Next Page