(1) Lubricating grease
Threads, pin-connection parts and other sliding or
moving parts.
5-6. Every 50 hour check
(2) Checking Transmission oil
Stop the engine on level surface and apply the
parking brake and lower implements to the
ground.
Clean around oil filling port and pull the gauge
straight out.
If oil level is between “H” and “L” of oil gauge, it
means ‘Proper amount’.
For oil specification, refer to “Lubricants and
capacity” at end of this
chapter. (See page 5-3)
Oil gauge
5
5 5
5 - 12
▶
The contaminated oil may reduce the durability of transmission and cause the
failure of hydraulic system. Clean around oil filling port and then open the cap.
Caution
To Next Page
Loading...
