LS tractor J2020H - Hazard Warning Light Switch; Work Light Switch

▶ If you use the hazard warning lights for a long time, it may cause a increase of
electrical consumption. Do not use the hazard warning lights for a long time.
Notice
(12) Hazard warning light switch
① EU version
 This is used to warn other drivers to pay attention
to emergency status. If you press the triangle
switch, all turn signal lights and indicators shall be
blinking.
Hazard warning light switch
② U.S.A version
 By turning the switch ① once to the clockwise, all
turn signal lights are blinked.
 This is used to warn other drivers to pay attention
to emergency status.
 Hazard warning light is automatically on by turning
on the driving light.
(Low beam)
▶ If you use the hazard warning lights for a long time, it may cause a increase of
electrical consumption. Do not use the hazard warning lights for a long time.
Notice
Light switch
①
②
(13) Work light switch
3
3 3
3 - 5
(13) Work light switch
 There is a switch to turn on the rear work light.
 ON – place the switch to the right direction and
the work light shall be ON.
 OFF – place the switch to the left direction and
the work light shall be OFF.
▶ When driving on the road at night, do not let the rear work light stay “ON”. It may
cause a disturbance to the driver of the following car.
Caution
ON
OFF