LS tractor J2020H - Changing Speed; Emergency Stop

(2) Changing speed
HST type
(3) Emergency Stop
1. Take a foot off from the HST pedal
and press the brake pedal at the same
time.
HST type
HST
pedal
Throttle
lever
HST
pedal
Throttle
lever
 Set driving speed properly depending on the road condition.
 Just depressing the HST pedal forward or
backward makes it possible to travel forward and
in reverse. Moving (forward/reverse), neutral and
changing speed can be controlled by the pedal.
 The range gear shift lever must be operated in
the neural state of the pedal, and after tractor
has stopped completely.
4
4 4
4 - 4
3. Apply the parking brake.
time.
2. Turn the key switch to “OFF” position.
Do not press the HST pedal before the
engine STOPS completely.
PTO
switch
Throttle
lever
Key
switch