LS tractor J2020H - PTO Gear Lever (if Fitted); 4 WD Lever

▶ After placing PTO switch in “OFF” and PTO shaft has stopped completely, place
the lever to desired position.
(5) PTO gear lever (if fitted)
 PTO gear lever can choose M/PTO,
M/PTO+REAR, and REAR PTO.
REAR PTO : 540 rev/min (Engine : 2603 rev/min)
MID PTO : 2000 rev/min (Engine : 2700 rev/min)
REAR PTO
MID/
REAR PTO
MID PTO
the lever to desired position.
▶ If the PTO select lever is NOT engaged smoothly, lift up and down on implement to
align the drive shaft.
Caution
(6) 4WD lever
 Stop the tractor completely before operating the
4WD lever.
 Push the lever forward to drive front wheels and
pull the lever to disengage the 4WD.
 Four wheel drive (4WD) is effective for the
followings.
-when traction is needed in plow ground.
-when working on slippery ground.
-when working with tiller on hard ground.
-
When crossing a ridge
4WD lever
3
3 3
3 - 9
▶ When driving on the road, disengage the 4WD. If not, it may cause damage of
drive line and serious accident. After working, before coming out from the field,
select 2WD.
▶ When driving the tractor at high speed while the 4WD is engaged, sharp steering
may cause a accident.
Caution
-
When crossing a ridge