LS tractor LB2100 Series - Part Illustrations and Ordering Information; Understanding Part Diagrams and Ordering; Part Interchangeability Symbols

PART ILLUSTRATIONS
GENERAL INFORMATION
Illustrations
Directional Reference
Parts Order
Instructions
1. GROUP NAME
: Detail classiflcation name for parts.
2. SECTION NAME
:Classiflcation name for parts.
3. COMPONENTS
: The components of an assembly are identifled by a bracket.
4. NO.
: Reference numbers are assiqned to parts in the figure.
INTERCHANGEABILITY
: Indicates the interchangeabillty of parts due to design change
~4265-99999
5265-00001~
The individual parts in their normal relationship to each other. Reference numbers are used
in the illustrations. These numbers correspond to those in the "Number" column and are
followed by the quantity required and description.
"Right hand" and "left hand" sides are determined by standing at the rear of the unit and
facing in the direction of forward travel.
Orders must give the complete description, correct part number, the total amount required,
the product model, all the necessary serial numbers, the method of shipment and the
shipping address.
Indicates that a new part can be used instead of an old part
when you order this part, plese order new part.
★ Due to our
p
olic
y
of continuousl
y
im
p
rovin
g
p
roducts, The information contained herein is
subject to change withour notice.
indicates that either parts can be used.
indicates that either parts can not be used.
indicates that a part has a serial number break.
When you order this part, please order a part according to the
serial number of the Loader.
Note : The Hydraulic Control valve installed in this
Backhoe is stipulated on the Name Plate.
H : HANIL AV 80/6
- 28 -