BACKHOE MOUNTING
CAUTION:
This is the Backhoe's Operator's manual for Safety Precautions and Tractor Preparations.
STEP 5.
STEP 6.
STEP 7.
Install the Mounting Bracket Pins into the holes. Raise the boom and stabilizers from the ground.
Move the tractor to put the subframe front side into the loader midmount slowly. Set the subframe
crosser parallel to the mounting bracket by using the backhoe control levers to lower the
stabilizers and boom to raise the subframe.
Release the parking brake of tractor, move the tractor rearward very carefully until the subframe is
fully engaged in both mounting devices on the tractor.
Cross Bar
Bracket Mid.
Subframe
Subframe
MODEL: R4010/R4010H,R4020/R4020H
XR4040/XR4040H, XR4046/XR4046H
XR4140/XR4140H, XR4145/XR4145H
XR4150/XR4150H, XR4155/XR4155H
Backhoe Frame
- 19 -
To Next Page
Loading...
